Start practice — 8 questions →
Sample questions
What restriction is placed on the application of ZeroTol 2.0 California regarding water sources?
- Do not apply directly to water or areas where surface water is present
- Do not apply to water that has been treated with hydrogen peroxide
- Do not apply to water sources larger than 1,000 gallons
- Do not apply to water during the rainy season
Show answer
The restrictions state: 'Do not apply directly to water, or to areas where surface water is present or to intervals below the easiest high-water mark.'🔗 Source
When applying ZeroTol 2.0 California as a foliar spray, what is the recommended dilution range?
- 1:200 to 1:400
- 1:100 to 1:1,500
- 1:50 to 1:100
- 1:10 to 1:50
Show answer
The label specifies a 1:200-1:400 dilution for foliar applications.🔗 Source
To achieve the best results at the first sign of disease when using a foliar spray, what dilution should be used?
- 1:100 dilution
- 1:200 dilution
- 1:400 dilution
- 1:1,500 dilution
Show answer
The mixing notes for foliar spray state: 'Use a 1:100 dilution for best results at first sign of disease.'🔗 Source
What is the Re-entry Interval (REI) for ZeroTol 2.0 California?
- 0 hours
- 12 hours
- 24 hours
- 48 hours
Show answer
The label explicitly lists the rei_hours as 0.🔗 Source
According to the label, where is ZeroTol 2.0 California permitted to be applied?
- Both indoor and outdoor locations
- Outdoor locations only
- Indoor locations only
- Only in public water systems
Show answer
The application section lists the location as 'Both' (indoor and outdoor).🔗 Source
Which of the following pathogens are controlled by ZeroTol 2.0 California?
- Fungal and bacterial pathogens such as Anthracnose and Botrytis
- Insects and mites affecting ornamental plants
- Weeds and invasive grasses in nursery stock
- Rodents and small mammals in agricultural fields
Show answer
The label states the product is a liquid fungicide/bactericide used for the control of various plant pathogens including fungi and bacteria.🔗 Source
Which of the following is a required piece of Personal Protective Equipment (PPE) for handling this product?
- Eye protection (goggles or face shield)
- Respirator mask
- Chemical-resistant apron
- Rubber boots
Show answer
The PPE section requires long-sleeved shirts, long pants, gloves, and eye protection (goggles or face shield).🔗 Source
Under what weather condition should the technician avoid applying this product?
- High wind speeds
- High humidity
- Extreme heat
- Freezing temperatures
Show answer
The timing/weather section states: 'Do not apply when wind speeds are high to avoid drift.'🔗 Source
← All practice exams