Start practice — 8 questions →
Sample questions
What is the recommended method for managing resistance when using Vibrance Maxx?
- Increase the dilution of the water-based slurry.
- Rotate this product with fungicides from different FRAC groups.
- Use the product only on legumes like chickpeas.
- Ensure uniform coverage of the seed during application.
Show answer
The label states: 'For resistance management, it is recommended to rotate this product with fungicides from different FRAC groups.'🔗 Source
Which of the following is an approved material for chemical-resistant gloves when handling Vibrance Maxx?
- Nitrile rubber
- Latex rubber
- Butyl rubber ≥14 mils
- Natural rubber
Show answer
The PPE section lists: 'Chemical-resistant gloves (barrier laminate, butyl rubber ≥14 mils, neoprene rubber ≥14 mils, polyvinyl chloride (PVC) ≥14 mils, Viton® ≥14 mils)'.🔗 Source
What is the restriction regarding the use of treated seed for ethanol production?
- Treated seed cannot be used for ethanol production under any circumstances.
- Treated seed may be used for ethanol production only if by-products are not used for livestock feed and no measurable residues remain.
- Treated seed may be used for ethanol production if the seed was treated with a water-based slurry.
- Treated seed may be used for ethanol production only if the application volume was sufficient for uniform coverage.
Show answer
The label states: 'Do not use treated seed for ethanol production unless by-products are not used for livestock feed and no measurable residues remain.'🔗 Source
What is the Re-entry Interval (REI) for this product?
- 24 hours
- 48 hours
- 72 hours
- The label does not specify an REI.
Show answer
The label explicitly lists: 'REI: 48'.🔗 Source
When mixing Vibrance Maxx with tank-mix partners, what is the correct procedure for adding the water?
- Fill the tank with the total required water first, then add the product.
- Add half of the required water to the tank and agitate before adding the product.
- Add the product to the tank first, then add the total required water and agitate.
- Mix the product and the tank-mix partner in a separate container before adding to the tank.
Show answer
The label states: 'Can be mixed with tank-mix partners; add half of required water to tank and agitate before adding product.'🔗 Source
Which active ingredient in Vibrance Maxx is present at a concentration of 3.52%?
- Sedaxane
- Fludioxonil
- Mefenoxam
- Metalaxyl
Show answer
The product description states: 'It contains three active ingredients: Sedaxane (4.69%), Mefenoxam (3.52%), and Fludioxonil (2.35%).'🔗 Source
If a user intends to mix Vibrance Maxx with an inoculant, what action must be taken first?
- Consult the product label for compatibility confirmation.
- Verify the inoculant is a water-based slurry.
- Consult the inoculant manufacturer.
- Perform a compatibility test with a tank-mix partner.
Show answer
The label states: 'The product may be compatible with certain inoculants, but users should consult the inoculant manufacturer before mixing.'🔗 Source
When applying both mefenoxam- and metalaxyl-containing products to the same crop in one season, the maximum usage is limited to:
- The total yearly application rate stated on the Vibrance Maxx label.
- The lowest yearly total application rate for the active ingredient stated on the label of the product containing the lowest yearly total on that crop.
- The sum of the yearly application rates of both products.
- The manufacturer's recommendation for legume seed treatment.
Show answer
The label states: 'Maximum usage when applying both metalaxyl- and mefenoxam-containing products to the same crop within the same season is limited to the lowest yearly total application rate for the active ingredient stated on the label of the product containing the lowest yearly total on that crop.'🔗 Source
← All practice exams