Start practice — 8 questions →
Sample questions
Which of the following is a stated restriction regarding the storage of the application solution?
- Do not store the application solution overnight.
- Do not store the solution for more than 8 hours.
- Do not store in temperatures below 40 degrees.
- Do not store in direct sunlight.
Show answer
The label explicitly states: 'Do not store the application solution overnight.'🔗 Source
What is the maximum amount of time an application solution may be held once prepared before starting the application?
- 8 hours
- 12 hours
- 24 hours
- Overnight
Show answer
The label states once prepared, an application solution may be held for up to 8 hours before starting the application.🔗 Source
Which method of agitation is specifically prohibited when mixing the product in an application tank?
- Air agitation
- Mechanical agitation
- Hydraulic agitation
- Continued agitation
Show answer
The label states to use mechanical or hydraulic means; do not use air agitation.🔗 Source
When applying a surface band at planting, what is the maximum recommended width for the spray band?
- 2 inches or less
- 0.5 inches
- 1.0 inch
- 5 inches
Show answer
The label specifies applying as a narrow (2 inches or less) surface band spray.🔗 Source
When using the soil shank injection method, at what depth should the injection be placed?
- 1-2 inches deep
- 0.5 - 1.0 inches deep
- 2-4 inches deep
- Just above the seed line
Show answer
The label states shank injection should be placed just below the seed row about 1-2 inches deep.🔗 Source
According to the mixing instructions, what is the required pH range for all VERIMARK insect control applications?
- pH 4 - 6
- pH 5 - 7
- pH 6 - 8
- pH 3 - 5
Show answer
The label states all applications should be adjusted to approximately pH 4 - 6.🔗 Source
When performing a transplant water treatment or Hill Drench, what is the minimum amount of treatment solution required per transplant?
- 2 fluid ounces
- 0.5 fluid ounces
- 1.0 fluid ounce
- 2.0 gallons
Show answer
The label states to apply at transplanting in a minimum of 2 fluid ounces of treatment solution per transplant.🔗 Source
What must be done with a surface band application within 24 hours of application?
- Incorporate it using sufficient irrigation
- Apply a second layer of spray
- Re-apply via soil shank injection
- Wait for the next rainfall
Show answer
The label requires incorporating surface band application within 24 hours using sufficient irrigation (usually 0.5 – 1.0 inches of water).🔗 Source
← All practice exams