Start practice — 7 questions →
Sample questions
Which environmental concern is specifically noted regarding the component Chlorothalonil?
- It can cause immediate soil sterilization.
- It can leach into groundwater and contaminate surface water via runoff.
- It increases the rate of evaporation during temperature inversions.
- It reacts with Viton gloves to cause skin irritation.
Show answer
The label notes that 'Chlorothalonil can leach into groundwater and contaminate surface water via runoff.'🔗 Source
When selecting chemical-resistant gloves for handling Tilt Bravo SE, which of the following materials meets the specified requirements?
- Standard latex gloves
- Nitrile rubber ≥ 14 mils
- Cotton fabric gloves
- Any rubber-based glove
Show answer
The PPE section specifies chemical resistant gloves such as nitrile rubber ≥ 14 mils, neoprene rubber ≥ 14 mils, polyvinyl chloride (PVC) ≥ 14 mils, Viton® ≥ 14 mils, or butyl rubber.🔗 Source
If performing an aerial application, what is the minimum buffer distance required from marine/estuarine water bodies unless an untreated buffer is present?
- 25 feet
- 105 feet
- 150 feet
- 200 feet
Show answer
The use restrictions state: 'Do not apply within 150 feet for aerial applications... to marine/estuarine water bodies unless an untreated buffer is present.'🔗 Source
According to the product description, what are the two active ingredients present in Tilt Bravo SE?
- Propiconazole (2.9%) and Chlorothalonil (38.5%)
- Chlorothalonil (38.5%) and Propiconazole (2.9%)
- Propiconazole (2.9%) and Polyvinyl chloride (38.5%)
- Chlorothalonil (38.5%) and Viton (2.9%)
Show answer
The label states Tilt Bravo SE is a superemulsion concentrate containing two active ingredients: Propiconazole (2.9%) and Chlorothalonil (38.5%).🔗 Source
When mixing Tilt Bravo SE, what must the applicator ensure regarding water volume?
- Use the minimum amount of water to save costs.
- Use sufficient water volume for adequate coverage and canopy penetration.
- Use distilled water only to prevent chemical reactions.
- Dilute with 50% alcohol to improve penetration.
Show answer
The mixing and dilution notes state: 'use sufficient water volume for adequate coverage and canopy penetration.'🔗 Source
Under what wind speed condition should an applicator avoid application to prevent drift due to high inversion potential?
- Wind speeds above 15 mph
- Wind speeds between 2 and 5 mph
- Wind speeds above 2 mph
- Wind speeds below 2 mph
Show answer
The timing and weather conditions section states: 'Avoid application when wind speeds are below 2 mph due to high inversion potential.'🔗 Source
What is the mandatory Pre-Harvest Interval (PHI) for crops intended for food, grazing, or animal feed components?
- 12 days
- 25 days
- 105 days
- 150 days
Show answer
The label states: 'Do not apply to crops intended for food, grazing, or any component of animal feed within 105 days of application.'🔗 Source
← All practice exams