Start practice — 8 questions →
Sample questions
According to the label, where is THEIA suitable for use?
- Fields, greenhouses, shadehouses, nurseries, and forests
- Only in residential gardens and lawns
- Only in commercial orchards and vineyards
- Only in hydroponic indoor systems
Show answer
The label specifies the product is suitable for use in fields, greenhouses, shadehouses, nurseries, and forests.🔗 Source
What must be done during the mixing and application of foliar applications to ensure uniform dispersion?
- Maintain constant agitation
- Add a surfactant to the mix
- Mix in a closed pressurized tank
- Use a high-pressure nozzle only
Show answer
The label states to maintain constant agitation during mixing and application to ensure uniform dispersion.🔗 Source
Under what wind speed condition should a foliar application of THEIA be made?
- When wind speed is 10 mph or less
- When wind speed is between 15-20 mph
- When wind speed is exactly 0 mph
- When wind speed is 20 mph or less
Show answer
The label states to apply foliar applications only when wind speed is 10 mph or less.🔗 Source
Which of the following is a stated restriction for the use of THEIA?
- Do not apply directly to water or areas where surface water is present
- Do not apply more than once every 14 days
- Do not use in temperatures above 90 degrees Fahrenheit
- Do not apply to organic crops
Show answer
The label explicitly states: 'Do not apply directly to water or areas where surface water is present.'🔗 Source
Which of the following plant diseases is THEIA specifically listed to control or suppress?
- Pythium spp.
- Aphids spp.
- Spider mites spp.
- Late blight spp.
Show answer
The label states THEIA is used for the control or suppression of diseases including Pythium spp.🔗 Source
To protect pollinators, when should THEIA application be avoided?
- While bees or other pollinating insects are actively visiting the treated area
- During the early morning hours
- When flowers are in full bloom
- During the night time
Show answer
The label states to avoid application while bees or other pollinating insects are actively visiting the treated area.🔗 Source
Which respiratory protection is acceptable for mixers, loaders, or applicators using THEIA?
- NIOSH-approved particulate filtering facepiece respirator with N, R, or P filter
- N95 dust mask only
- Half-face respirator with organic vapor cartridges
- Full-face respirator with acid gas cartridges
Show answer
The label requires a NIOSH-approved particulate filtering facepiece respirator with any N, R, or P filter (or other specified NIOSH particulate respirators).🔗 Source
When applying THEIA via chemigation, which safety components must the system have?
- Functional check valve, vacuum relief valve, and low pressure drain
- High pressure pump, timer, and filtration screen
- Pressure gauge, backflow preventer, and chemical injector
- Automatic shut-off valve, flow meter, and tank agitator
Show answer
The label requires chemigation systems to have a functional check valve, vacuum relief valve, and low pressure drain.🔗 Source
← All practice exams