Start practice — 8 questions →
Sample questions
Which of the following is a valid application site for Termidor HE according to the label?
- Indoor only
- Outdoor posts, poles, and wood landscape ornamentation
- Only inside concrete slabs
- Only for termites found in basements
Show answer
The label notes that applications include posts/poles/wood landscape ornamentation and termites above ground.🔗 Source
According to the restrictions, where is it prohibited to treat a structure?
- Below the bottom of the footing
- On wood landscape ornamentation
- Inside a basement
- On posts and poles
Show answer
The restrictions explicitly state: 'DO NOT treat a structure below the bottom of the footing.'🔗 Source
When performing pre-construction and post-construction Horizontal Treatments, what is the required application rate?
- 2 gallons per 10 linear feet per foot of depth
- 0.8 fl ozs per 1.00 gallon of water
- 1.0 to 1.5 gallons per 10 square feet
- 0.125% concentration per 10 square feet
Show answer
The label states the rate for horizontal treatments is 1.0 to 1.5 gallons per 10 square feet.🔗 Source
Which of the following termite species are controlled by Termidor HE according to the label?
- Only subterranean and drywood termites
- Subterranean, arboreal, drywood, and dampwood termites including Reticulitermes and Coptotermes
- Subterranean and dampwood termites only
- All wood-boring beetles and termites
Show answer
The label specifies control for subterranean, arboreal, drywood, and dampwood termites including species of Reticulitermes, Coptotermes, Heterotermes, Nasutitermes, and Zootermopsis.🔗 Source
To achieve a 0.06% finished strength, how much Termiticide (fl ozs) should be mixed per 1.00 gallon of water?
- 1.6 fl ozs
- 0.125 fl ozs
- 0.8 fl ozs
- 39.5 fl ozs
Show answer
The mixing instructions state that for a 0.06% finished strength, the amount is 0.8 fl ozs per 1.00 gal water.🔗 Source
When should horizontal treated zone(s) and interior vertical treated zone(s) applications be made?
- After the concrete slabs are poured
- Only during the post-construction phase
- Before covering the area with the concrete slabs
- Only when termites are visible above ground
Show answer
The notes state that these applications should be made before covering the area with the concrete slabs.🔗 Source
For pre-construction vertical and all post-construction treatments, what is the required dilution concentration?
Show answer
The label specifies a dilution of 0.125% for pre-construction vertical and all post-construction treatments.🔗 Source
What is the required application rate for vertical treated zones along the interior and exterior perimeter of foundation walls?
- 1.0 to 1.5 gallons per 10 square feet
- 2 gallons per 10 linear feet per foot of depth
- 0.125 gallons per 10 linear feet
- 19.8 fl ozs per 25 gallons of water
Show answer
The label requires 2 gallons per 10 linear feet per foot of depth for vertical treated zones.🔗 Source
← All practice exams