Start practice — 7 questions →
Sample questions
If applying to turfgrass grown on sodfarms, how long must you wait after application before harvesting or transplanting?
- 12 hours
- 17 days
- 12 days
- 2 weeks
Show answer
Harvesting or transplanting turfgrass grown on sodfarms is prohibited for 17 days following application.🔗 Source
When preparing a tank mix with TARTAN STRESSGARD, in what order should tank mix partners be added?
- Liquids, then wettable powders, then emulsifiable concentrates
- Emulsifiable concentrates, then liquids, then wettable granules
- Water-soluble packaging/wettable powders/wettable granules, then liquid flowables/liquids, then emulsifiable concentrates
- All partners must be added simultaneously with the agitator running
Show answer
In general, tank mix partners must be added in this order: (1) products packaged in water-soluble packaging, wettable powders, wettable granules (dry flowables); (2) liquid flowables, liquids; and (3) emulsifiable concentrates.🔗 Source
What restriction is placed on the use of clippings from treated areas?
- Clippings may be used as mulch only
- Do not use clippings for animal feed
- Clippings must be buried at least 12 inches deep
- Clippings must be composted for 17 days
Show answer
Do not use clippings for animal feed.🔗 Source
What is the required re-entry interval (REI) for this product?
- 17 days
- 7 days
- 12 hours
- 24 hours
Show answer
REI: 12 hours🔗 Source
When mixing TARTAN STRESSGARD and tank mix partners, when should the agitator be started?
- After all products are added to the tank
- After the first liquid partner is added
- Before adding any tank mix partners
- Only after the water is fully added
Show answer
Start the agitator running before adding any tank mix partners.🔗 Source
According to the PPE requirements for early entry involving contact with treated plants, soil, or water, which of the following is required?
- Chemical-resistant gloves (such as nitrile or butyl ≥ 14 mils) made of any waterproof material
- A full-body waterproof suit
- Respirator and face shield
- Rubber boots only
Show answer
PPE required... involves contact with anything that has been treated... is: • Protective eyewear • Coveralls • Chemical-resistant (such as nitrile or butyl ≥ 14 mils) gloves made of any waterproof material • Shoes plus socks🔗 Source
When mixing TARTAN STRESSGARD alone in a tank, when should the application of the solution begin?
- As soon as the product is added to the water
- After the product has completely dispersed into the mix water
- Once the tank is half full of water and product
- After the agitator has been running for 12 hours
Show answer
Begin application of the solution after TARTAN STRESSGARD has completely dispersed into the mix water.🔗 Source
← All practice exams