Start practice — 8 questions →
Sample questions
According to the label, what is the correct dilution ratio for mixing the product with water?
- 1 gallon of product to 10 gallons of water
- 1 gallon of product to 2 gallons of water
- 1 gallon of product to 4 gallons of water
- 1 gallon of product to 5 gallons of water
Show answer
rate: 1 gallon of product per 4 gallons of water; unit: gallons; dilution: 1:4🔗 Source
Under what weather conditions should the product be applied if the algae are actively growing?
- On a cloudy, windy day
- On a sunny, calm day
- During a light rain shower
- Any time of day regardless of wind
Show answer
If algae are actively growing, apply on a sunny, calm day.🔗 Source
When applying SePRO Total Pond - Clear, what is the maximum surface area of a water body that should be treated at one time?
- 1/4 of the total water body surface area
- 1/2 of the total water body surface area
- 2/3 of the total water body surface area
- The entire surface area
Show answer
Do not treat more than 1/2 of the total water body surface area at any one time.🔗 Source
What is the recommended application method for SePRO Total Pond - Clear when targeting bottom-matting or plant-like algae?
- Apply a fine mist from a distance
- Apply solution directly to the surface
- Apply solution directly above the area of growth
- Mix with water and spray the entire water body uniformly
Show answer
For bottom-matting or plant-like algae, apply solution directly above the area of growth.🔗 Source
Which of the following is a required piece of personal protective equipment (PPE) according to the label?
- Safety goggles
- Chemical-resistant gloves
- Rubber apron
- N95 respirator
Show answer
PPE: chemical-resistant gloves, long-sleeve shirt, long pants, shoes plus socks, and waterproof gloves.🔗 Source
What is the active ingredient in SePRO Total Pond - Clear?
- SeClear Algaecide
- Phosphorus-binding agent
- Copper Sulfate Pentahydrate (4.1%)
- Planktonic-control agent
Show answer
It contains Copper Sulfate Pentahydrate (4.1%) as the active ingredient.🔗 Source
Which of the following is NOT listed as a target site for this product?
- Irrigation and drainage canals
- Ornamental ponds
- Saltwater coastal lagoons
- Fountains
Show answer
The product is intended for use in ponds, lakes, reservoirs, irrigation and drainage canals, and man-made outdoor water features such as gardens, ornamental ponds, and fountains.🔗 Source
Which statement regarding the timing of application is correct?
- The product can only be used in the summer months
- The product should be applied after ice has formed
- The product can be used year-round (Spring, Summer, Fall, Winter)
- The product must only be used in the spring
Show answer
Can be used year-round (Spring, Summer, Fall, Winter). Apply before ice forms.🔗 Source
← All practice exams