Start practice — 8 questions →
Sample questions
Which of the following is a prohibited application method for Scholar EZ?
- Thermal fogging in storage facilities
- Post-harvest application to pome fruit
- Applying to fruit previously treated with fludioxonil via drench or dip/wash
- Applying to areas where surface water is present
Show answer
Do not apply to fruit previously treated with fludioxonil via drench or dip/wash.🔗 Source
What is the correct Re-entry Interval (REI) requirement for ventilation after Scholar EZ treatment?
- 8 hours with ventilation or 24 hours without ventilation
- 8 hours with no ventilation or 24 hours with ventilation
- 12 hours of no ventilation or 12 hours of ventilation
- 24 hours with no ventilation or 48 hours with ventilation
Show answer
After treatment, ventilation is required: 8 hours with no ventilation or 24 hours with ventilation.🔗 Source
When performing post-harvest thermal fogging with Scholar EZ, how should the thermal fogging machine be positioned?
- Vertically inside the treatment room
- Horizontally inside the treatment room
- Horizontally outside the treatment room at approximately 3 feet from the floor
- Vertically outside the treatment room at approximately 3 feet from the floor
Show answer
Application must be performed using a thermal fogging machine, which should be placed horizontally outside the treatment room at a height of approximately 3 feet from the floor.🔗 Source
What are the required chemical-resistant glove materials for handlers of Scholar EZ?
- Latex, vinyl, or polyester
- Butyl rubber, nitrile, or neoprene
- Nitrile, latex, or heavy-duty rubber
- Neoprene, vinyl, or butyl rubber
Show answer
chemical-resistant gloves (butyl rubber, nitrile, or neoprene)🔗 Source
When preparing a mixture for immediate operation, what instruction does the label provide?
- Dilute with water to reach 98% concentration
- Mix only in a pressurized tank
- Prepare no more mixture than is needed for immediate operation
- Always mix with a surfactant to increase fog density
Show answer
Prepare no more mixture than is needed for immediate operation.🔗 Source
According to the label, what is the required timing for turning off cooling systems and humidifiers prior to treatment?
- At least 4 hours prior to treatment
- At least 8 hours prior to treatment
- At least 12 hours prior to treatment
- Exactly 24 hours prior to treatment
Show answer
ensure all cooling systems and humidifiers are turned off at least 12 hours prior to treatment.🔗 Source
What is the application rate of Scholar EZ per 100 lb fruit bin?
- 0.035 oz
- 0.35 oz
- 3.5 oz
- 0.070 oz
Show answer
amount: 0.035 oz; per_unit: 100 lb fruit bin🔗 Source
Which environmental precaution must be observed regarding water when using Scholar EZ?
- Do not apply during rain or high humidity
- Do not apply directly to water or areas where surface water is present
- Ensure all water sources are covered before fogging
- Only apply when water levels are below a specific threshold
Show answer
Do not apply directly to water or areas where surface water is present.🔗 Source
← All practice exams