Start practice — 8 questions →
Sample questions
Regarding weather conditions, when should application be avoided?
- When wind velocity exceeds 10 mph
- When temperatures exceed 90 degrees
- When humidity is above 80%
- When frost is expected within 24 hours
Show answer
The label instructs to avoid application during high wind or when wind velocity exceeds 10 mph.🔗 Source
Which of the following pests is Resicore designed to control?
- Annual grasses and broadleaf weeds
- Insects and fungal pathogens
- Perennial shrubs and woody vines
- Nematodes and soil-borne bacteria
Show answer
The label states Resicore is designed for the control of annual grasses and broadleaf weeds.🔗 Source
To prevent groundwater contamination, Resicore should not be applied if the water table is less than how many feet below the surface?
- 30 feet
- 10 feet
- 50 feet
- 100 feet
Show answer
The label prohibits application where the water table is less than 30 feet below the surface.🔗 Source
Under what soil condition is it prohibited to apply Resicore?
- Soils with less than 1% organic matter
- Soils with more than 5% organic matter
- Soils with high clay content
- Soils with high nitrogen levels
Show answer
The label states: 'Do not apply to soils with less than 1% organic matter.'🔗 Source
According to the label, which tank-mix partners can Resicore be mixed with, provided caution is used to avoid crop injury?
- Glyphosate or glufosinate
- Atrazine or metolachlor
- 2,4-D or dicamba
- Paraquat or imazapyr
Show answer
The label notes Resicore can be mixed with certain tank-mix partners like glyphosate or glufosinate.🔗 Source
What is the required application rate range for Resicore per acre?
- 1.25 to 3.00 quarts per acre
- 0.50 to 1.50 gallons per acre
- 2.00 to 4.00 quarts per acre
- 1.00 to 2.50 pints per acre
Show answer
Application rates range from 1.25 to 3.00 quarts per acre depending on soil texture and organic matter.🔗 Source
Which of the following is a required piece of Personal Protective Equipment (PPE) for handling Resicore?
- Chemical-resistant gloves
- N95 respirator
- Safety goggles
- Tyvek suit
Show answer
The label specifically requires chemical-resistant gloves of any waterproof material.🔗 Source
In which of the following crop sites can Resicore be applied?
- Field corn, field seed corn, field silage corn, and yellow popcorn
- Wheat, barley, oats, and rye
- Soybeans, cotton, and peanuts
- Vegetable gardens and fruit orchards
Show answer
The label specifies use in field corn, field seed corn, field silage corn, and yellow popcorn.🔗 Source
← All practice exams