Start practice — 24 questions →
Sample questions (showing 8 of 24)
To achieve a finished strength of 1% copper metal for Above Ground Contact Applications, what is the correct mixing ratio?
- 1 part product to 3 parts solvent
- 1 part product to 4 parts solvent
- 7 to 1:8 dilution of solvent and QNAP8
- 1 part product to 2 parts solvent
Show answer
The mixing instructions for a 1% copper metal finished strength specify a 7 to 1:8 dilution of solvent and QNAP8.🔗 Source
According to the label, what is the specific site intended for application of QNAP 8?
Show answer
The label facts state the site for application is wood.🔗 Source
When applying QNAP 8 via the Dip method for Above Ground Contact, how long must the wood be immersed?
- Exactly 1 hour
- 3 minutes or longer
- At least 25%
- Between 1 and 2 minutes
Show answer
The label instructions for dipping wood for above ground contact state to immerse wood for 3 minutes or longer.🔗 Source
When performing Above Ground Contact Applications, which application method is strictly prohibited?
- Drip irrigation
- Brush application
- Airless sprayer, fine mist, or spray
- Dipping
Show answer
The label explicitly states: 'Do not apply with an airless sprayer, by fine mist or by spray.'🔗 Source
What is the intended purpose of the QNAP 8 MU Copper Naphthenate Concentrate?
- Formulating or repackaging purposes only
- Direct application to residential lawns
- Direct application to structural timber
- Treatment of aquatic vegetation
Show answer
The label states the concentrate is for formulating or repackaging purposes only.🔗 Source
According to the label, what is the required dilution for Remedial Applications on standing wood poles and existing structures?
- 0.75% to 2.0% copper metal
- 2% copper metal
- 1% copper metal
- 0.03 to 0.06 lbs copper metal/ft3
Show answer
For Remedial Applications (standing wood poles, piling and other existing structures), the dilution is specified as 2% copper metal.🔗 Source
If an end-use product is formulated or repackaged from QNAP 8 MU Copper Naphthenate Concentrate, how must it be labeled?
- Intended For Exterior Use
- For Indoor Use Only
- Agricultural Grade
- Residential Use Only
Show answer
End-use products formulated from the concentrate must be labeled for 'Intended For Exterior Use'.🔗 Source
Under which condition should QNAP 8 NOT be used in a garden?
- Where wood is in contact with soil
- Where fruit and or vegetables will be grown
- Where the wood is used for structural support
- Where the wood is used for standing poles
Show answer
The restrictions state: 'Do not use QNAP5W-treated wood for garden applications where fruit and or vegetables will be grown.'🔗 Source
← All practice exams