Start practice — 8 questions →
Sample questions
If a technician is mixing a 50 gallon tank, how much concentrate should be used according to the mixing instructions?
- 4 - 8 fl. oz.
- 7 - 14 fl. oz.
- 10 - 20 fl. oz.
- 20 - 40 fl. oz.
Show answer
The mixing table specifies 10 - 20 fl. oz. of concentrate per 50 gal tank.🔗 Source
What is the specified rate for treating Fleas in infested areas?
- 0.5%
- 1.0%
- 2 2/3 oz.
- 1 gal per 10 sq. ft.
Show answer
The label lists the rate for Fleas in infested areas as 0.5%.🔗 Source
What is the required application rate for treating Darkling Beetles?
- 0.5 - 1.0% emulsion
- 2 2/3 - 5 1/3 fl. oz. concentrate per 1,000 sq. ft.
- 1 gal per 10 sq. ft.
- 10 - 20 fl. oz. per 50 gal of water
Show answer
The label specifies a rate of 2 2/3 - 5 1/3 fl. oz. concentrate per 1,000 sq. ft. for Darkling Beetles.🔗 Source
When treating for flies, what is the maximum frequency allowed for application?
- Once every 24 hours
- No more than twice per week and at least 3 days apart
- Once per week
- No more than three times per week
Show answer
The label states to treat no more than twice per week and at least 3 days apart for flies.🔗 Source
According to the restrictions, which of the following is prohibited?
- Applying to unmaintained areas
- Applying to crawling insects
- Applying to lactating or food animals
- Applying to the perimeter of a building
Show answer
The restrictions state: 'Do not apply to lactating or food animals.'🔗 Source
Which specific type of ant is EXCLUDED from the target crawling insect list?
- Carpenter ants
- Fire ants
- Harvester ants
- Pharaoh ants
Show answer
The label explicitly excludes Pharaoh ants from the list of target ants.🔗 Source
When applying to animal areas for House Flies and Stable Flies, how should the product be applied?
- As a dry powder
- As a coarse, wet spray
- As a 0.5% emulsion only
- Via drilling and injecting
Show answer
For House Flies and Stable Flies in animal areas, the label instructs to apply as a coarse, wet spray.🔗 Source
When treating under slabs for Ants, Cockroaches, and Scorpions, what is the correct application method and rate?
- Broadcast to all surfaces at 0.5%
- 1 gal per 10 sq. ft. via drilling and injecting or horizontal rodding
- 2 2/3 oz. per 1,000 sq. ft. around the perimeter
- 10 - 20 fl. oz. per 50 gal of water
Show answer
For under slab treatments, the label specifies 1 gal per 10 sq. ft. via drilling and injecting or horizontal rodding.🔗 Source
← All practice exams