Start practice — 8 questions →
Sample questions
According to the rotational restrictions for crops intended for food and feed, how many days must pass before using another fungicide if the crop is not soybean, sugar beet, or sweet corn?
- 0 days
- 30 days
- 60 days
- 48 days
Show answer
Rotational restrictions apply: 0 days for many crops, 30 days for soybean/sugar beet/sweet corn, and 60 days for all other crops intended for food and feed.🔗 Source
Which combination of active ingredients is contained in Inspire Super?
- Difenoconazole (8.4%) and Cyprodinil (24.1%)
- Difenoconazole (24.1%) and Cyprodinil (8.4%)
- Cyprodinil (8.4%) and Difenoconazole (24.1%)
- Difenoconazole (14 mils) and Cyprodinil (14 mils)
Show answer
It contains two active ingredients: Difenoconazole (8.4%) and Cyprodinil (24.1%).🔗 Source
Where is application of this product strictly prohibited regarding water proximity?
- Any area where runoff may occur
- Directly to water or to areas where surface water is present in tidal areas below the mean high water mark
- Any body of water larger than one acre
- Any area with standing water from rain
Show answer
Do not apply directly to water or to areas where surface water is present in tidal areas below the mean high water mark.🔗 Source
To manage resistance, the label recommends rotating Inspire Super with which groups of fungicides?
- Group 1 or Group 2
- Group 3 or Group 9
- Group 10 or Group 12
- Group 5 or Group 7
Show answer
For resistance management, it is recommended to rotate with other Group 3 or Group 9 fungicides.🔗 Source
Under which weather condition should an applicator avoid applying Inspire Super?
- When winds are above 10 mph
- When rainfall is forecast to occur within 48 hours
- When humidity is above 80%
- When temperatures exceed 90 degrees
Show answer
Avoid application if rainfall is forecast within 48 hours.🔗 Source
What is the Re-entry Interval (REI) for this product?
- 12 hours
- 24 hours
- 48 hours
- 12 days
Show answer
REI: 12🔗 Source
What is the required thickness for chemical-resistant gloves when handling Inspire Super?
- 12 mils
- 14 mils
- Greater than 14 mils
- 24 mils
Show answer
The label specifies chemical-resistant gloves (Barrier Laminate, Butyl Rubber > 14 mils, Nitrile Rubber > 14 mils, Polyvinyl Chloride (PVC) > 14 mils, or Viton > 14 mils).🔗 Source
In what manner can Inspire Super be applied to crops?
- Soil drench only
- Aerial application only
- Block, alternating, or tank-mix applications
- Seed treatment only
Show answer
This product is applied as a foliar spray and can be used in block, alternating, or tank-mix applications depending on specific crop directions.🔗 Source
← All practice exams