Start practice — 8 questions →
Sample questions
What is the rate for controlling the Armyworm when applying Grizzly Too to Alfalfa?
- 0.015 - 0.025 lb ai/A (0.96 - 1.60 fl oz/A)
- 0.02 - 0.03 lb ai/A (1.28 - 1.92 fl oz/A)
- 0.03 - 0.05 lb ai/A (2.00 - 3.50 fl oz/A)
- 0.01 - 0.02 lb ai/A (0.80 - 1.50 fl oz/A)
Show answer
target_pest: ... Armyworm ... rate: 0.02 - 0.03; unit: lb ai/A; notes: 1.28 - 1.92 fl oz/A🔗 Source
What is the required Re-entry Interval (REI) for Grizzly Too?
- 12 hours
- 24 hours
- 48 hours
- 72 hours
Show answer
REI: 24 hours🔗 Source
Under what condition should an applicator avoid making ground or aerial applications of Grizzly Too?
- During temperature inversions
- When humidity is above 80%
- During periods of high rainfall
- When the target pest density is low
Show answer
Do not make aerial or ground applications into temperature inversions.🔗 Source
Which of the following is a required piece of Personal Protective Equipment (PPE) for Grizzly Too?
- Chemical-resistant gloves (Category G, such as barrier laminate or Viton® ≥ 14 mils)
- Nitrile gloves (Category E)
- Full-face respirator
- Waterproof coveralls
Show answer
PPE: Wear long-sleeved shirt and long pants, chemical-resistant gloves (Category G, such as barrier laminate or Viton® ≥ 14 mils), shoes plus socks, and protective eyewear.🔗 Source
What is the maximum allowable wind velocity for an aerial application of Grizzly Too?
Show answer
Do not apply via aerial application when wind velocity exceeds 15 mph.🔗 Source
When applying Grizzly Too via aerial methods, what must the applicator adjust for?
- Downwind displacement
- Upwind drift
- Cloud ceiling height
- Soil moisture levels
Show answer
When applying via aerial, adjust for downwind displacement.🔗 Source
When mixing Grizzly Too into a tank, what is the correct sequence and procedure for adding products?
- Add Grizzly Too first, then fill the tank with 1/2 to 2/3 the volume of mixing solution.
- Add Grizzly Too last, once all other products are fully dispersed, after filling the tank with 1/2 to 2/3 volume.
- Add Grizzly Too after filling the tank to full volume to ensure dispersion.
- Add Grizzly Too at any time during the mixing process as long as agitation is continuous.
Show answer
Always add Grizzly Too last when tank-mixing. Fill the tank with 1/2 to 2/3 the volume of the mixing solution. Ensure all other products are fully dispersed before adding Grizzly Too. Add the remainder of the mixing solution to reach desired volume.🔗 Source
According to the label, which application method is restricted for use in chemigation systems connected to public water systems?
- Ground application
- Aerial application
- Chemigation
- All methods
Show answer
Do not apply this product through chemigation systems connected to public water systems.🔗 Source
← All practice exams