Start practice — 8 questions →
Sample questions
According to the label, where should Fame SC be applied when targeting Pythium Damping Off?
- Only to the turf surface after establishment.
- Uniformly to the seed bed before, during, or just after seeding.
- In the root zone of established turf only.
- On the foliage of the growing plants.
Show answer
For Pythium Damping Off, the label instructs to apply uniformly to the seed bed before, during, or just after seeding.🔗 Source
Which of the following pests is controlled by Fame SC at a rate of 0.1 - 0.4 fl oz per 1,000 sq ft?
- Fairy Ring
- Necrotic Ring Spot
- Brown Patch (Rhizoctonia solani)
- Pythium Root Dysfunction
Show answer
Brown Patch (Rhizoctonia solani) has a rate of 0.1 - 0.4 fl oz per 1,000 sq ft, whereas others listed have higher minimum rates.🔗 Source
What is the recommended application rate for controlling Snow Mold, Pink (Microdochium nivale) per 1,000 sq ft?
- 0.1 fl oz
- 0.2 fl oz
- 0.3 fl oz
- 0.4 fl oz
Show answer
The label specifies a rate of 0.4 fl oz product per 1,000 sq ft for Snow Mold, Pink.🔗 Source
When targeting Fairy Ring (Basidiomycete fungi), what is the required application method regarding water?
- Apply in 4 gallons of water per 1,000 sq ft or irrigate after application with at least 3/4 inch water.
- Apply in 2 gallons of water per 1,000 sq ft and wait 24 hours before irrigating.
- Apply as a dry granule and irrigate with 1 inch of water immediately.
- Apply in 10 gallons of water per 1,000 sq ft to ensure deep penetration.
Show answer
The label states for Fairy Ring to apply in 4 gallons of water per 1,000 sq ft or irrigate with at least 3/4 inch water.🔗 Source
For Brown Patch (Rhizoctonia solani), what is the specific instruction for curative applications made in the spring?
- Apply 0.4 fl oz per 1,000 sq ft every 7 days.
- Apply 16 fl oz/A with a 14 day application interval.
- Tank-mix with a fungicide labeled for Anthracnose.
- Apply only when conditions are favorable for disease development.
Show answer
For curative applications of Brown Patch in the spring, the label says to apply 16 fl oz/A with a 14 day application interval.🔗 Source
What is the application interval for Pythium Root Rot (Pythium spp.)?
- 7 to 10 days
- 14 to 21 days
- 14 to 28 days
- 21 to 28 days
Show answer
The label specifies an application interval of 7 to 10 days for Pythium Root Rot.🔗 Source
Under what specific soil temperature conditions should Fame SC be applied for Pythium Root Dysfunction?
- When mean daily soil temperatures are between 40°F and 60°F.
- When mean daily soil temperatures are between 50°F and 75°F.
- When mean daily soil temperatures are between 60°F and 80°F.
- When mean daily soil temperatures are between 32°F and 50°F.
Show answer
The label notes for Pythium Root Dysfunction to apply when mean daily soil temperatures are between 50°F and 75°F.🔗 Source
If a technician is managing a 'heavy' infestation of Gray Leaf Spot, what does the label recommend?
- Increase the application rate to 0.8 fl oz per 1,000 sq ft.
- Apply every 7 days instead of every 14 to 28 days.
- Tank-mix with another product labeled for control of Gray Leaf Spot.
- Wait until the disease is clearly visible before applying.
Show answer
For Gray Leaf Spot under heavy disease pressure, the label instructs to tank-mix with another product labeled for control of Gray Leaf Spot.🔗 Source
← All practice exams