Start practice — 8 questions →
Sample questions
When treating termite carton nests in trees or building voids, what is the required solution strength?
Show answer
The label specifies a rate of 0.25%-0.50% solution for termite carton nests in trees or building voids.🔗 Source
Where is Cyper WSP NOT permitted to be used for pre-construction soil treatment?
- Under concrete slabs
- In garden beds
- Around tree roots
- In gravel walkways
Show answer
The restrictions state: 'Do not use this product for pre-construction soil treatment under concrete slabs.'🔗 Source
What is the minimum distance you must maintain from aquatic habitats (such as lakes or rivers) when applying this product?
- 25 feet
- 10 feet
- 50 feet
- 100 feet
Show answer
The label states: 'Do not apply within 25 feet of aquatic habitats (such as, but not limited to lakes, reservoirs, rivers...)'🔗 Source
When performing a Perimeter Barrier Application for insects, what is the recommended dilution range for 1 packet (0.33 oz.)?
- 1-5 gallons of water
- 10-20 gallons of water
- 0.1-0.5 gallons of water
- 5-10 gallons of water
Show answer
The label states that for a perimeter barrier application, 1 packet (0.33 oz.) is diluted in 1-5 gallons of water.🔗 Source
Which of the following is a target pest for Cyper WSP when applying a 0.1% solution to voids and galleries in damaged wood?
- Drywood termites
- Ants only
- Cockroaches
- Bed bugs
Show answer
The label specifies that a 0.1% emulsion can be used for subterranean aerial colonies, Formosan aerial colonies, or drywood termites in damaged wood.🔗 Source
According to the restrictions, under what weather condition should you NOT treat soil?
- When soil is water-saturated or frozen
- When the temperature is below 50 degrees
- When the humidity is above 80%
- When there is no sunlight
Show answer
The label explicitly states: 'Do not treat soil that is water-saturated or frozen.'🔗 Source
What is the maximum sustained wind speed allowed at nozzle end height for making on-grade applications?
Show answer
The label states: 'Do not make on-grade applications when sustained wind speeds are above 10 mph (at application site) at nozzle end height.'🔗 Source
To control termites active inside trees, utility poles, or fence posts, how should the 0.1% solution be applied?
- Inject into the interior infested cavity using a tool with a splash back guard
- Spray on the exterior bark only
- Drench the base of the pole/post
- Apply as a perimeter barrier around the base
Show answer
The label instructs to drill to find the interior cavity and inject the 0.1% solution using a treatment tool with a splash back guard.🔗 Source
← All practice exams