Start practice — 24 questions →
Sample questions (showing 8 of 24)
When performing a volumetric treatment for flying insects (flies, mosquitoes, wasps, etc.), what is the required application rate?
- 1-3 seconds per 1,000 cubic feet of space
- 10 seconds per 100 square feet
- 20 seconds per 1,000 cubic feet of space
- 3-5 seconds per 100 cubic feet of space
Show answer
The label states to spray flying insects for 1-3 seconds per 1,000 cubic feet of space.Which of the following pests is listed as a target for CB 40 Residual?
- Sawtoothed Grain Beetles
- Termites
- Bed Bugs
- Roaches (Large species only)
Show answer
Sawtoothed Grain Beetles are explicitly listed as a target pest in the label facts.What must be done with food and food processing equipment before applying CB 40 Residual in a food processing plant?
- Cover or remove all food and food processing equipment
- Spray food with a cleaning compound first
- Only cover the food that is currently being eaten
- No action is required if the facility is closed
Show answer
The restrictions state to cover or remove all food and food processing equipment before application.What is the restriction regarding the size of the room being treated?
- Do not use in a room 5 ft. x 5 ft. or smaller
- Do not use in rooms larger than 10,000 cubic feet
- Do not use in rooms with ceilings higher than 10 feet
- Do not use in rooms smaller than 10 ft. x 10 ft.
Show answer
The label states: 'Do not use in a room 5 ft. x 5 ft. or smaller; instead, allow fog to enter from other rooms.'Which of the following is a permitted application method in food areas/food handling establishments?
- A crack and crevice application while facilities are in operation
- A space treatment while facilities are in operation
- A volumetric treatment while food is exposed
- A space treatment without shutting down the operation
Show answer
The label states a crack and crevice application can be done in food areas while facilities are in operation by taking extreme care not to contaminate surfaces.When performing a General Volumetric Treatment for crawling insects, what is the required application rate?
- 20 seconds per 1000 cu. ft. of space
- 10 seconds per 100 square feet
- 5 to 10 seconds per 1000 cu. ft. of space
- 1-3 seconds per room
Show answer
The label states for General Volumetric Treatment to apply at the rate of 20 seconds per 1000 cu. ft. of space.When applying a crack and crevice application in food handling establishments, what is permitted?
- Volumetric treatment while the facility is operating
- Careful crack and crevice application for inspection purposes at all times
- Spraying directly on exposed food surfaces
- Leaving food uncovered during the application
Show answer
The label states that careful crack and crevice application for inspection purposes is permissible at all times in food handling establishments.In a medical care facility, how long must the area be ventilated before returning patients?
- 2 hours
- 15 minutes
- 7 days
- The label does not specify a time for medical facilities
Show answer
The label specifies that in medical care facilities, ventilate the area for 2 hours before returning patients.← All practice exams