Start practice — 8 questions →
Sample questions
Which of the following is an explicitly prohibited action regarding household items during application?
- Using food utensils for application.
- Applying to ornamental plants.
- Applying to garden vegetables.
- Applying in cracks and crevices.
Show answer
The Use restrictions section states: 'Do not use food utensils (teaspoons/measuring cups) for application.'🔗 Source
What environmental condition should be met to prevent product drift during application?
- The air must be calm.
- The temperature must be between 65° and 80°F.
- Humidity must be above 50%.
- Wind speed must be at least 5 mph.
Show answer
The Timing and weather conditions section states: 'Apply when air is calm to avoid drift.'🔗 Source
What is the temperature range requirement for fire ant treatment?
- 45° to 65°F
- 65° to 80°F
- 70° to 90°F
- 80° to 100°F
Show answer
The Timing and weather conditions section states: 'For fire ant treatment, apply when temperatures are between 65° and 80°F.'🔗 Source
When applying Bonide Delta Dust to the leaves of vegetables or ornamentals, what is the required application rate?
- 0.05 oz/100 sq. ft.
- 2 oz/100 sq. ft.
- 6 oz/100 sq. ft.
- 8 oz/100 sq. ft.
Show answer
The application rates and targets section states for Vegetables/Ornamentals: rate: 2; unit: oz/100 sq. ft.🔗 Source
Which of the following is a prohibited application site for Bonide Delta Dust when used indoors?
- Cracks and crevices
- Voids in walls
- Carpets and upholstery
- Various surfaces
Show answer
Under Use restrictions: 'Do not apply to carpets, upholstery, or fabrics indoors to avoid staining.'🔗 Source
When applying the product to leaves, how should the coverage be managed?
- Apply only to the upper leaf surface.
- Apply only to the lower leaf surface.
- Apply lightly to cover both upper and lower leaf surfaces.
- Apply heavily to ensure deep penetration.
Show answer
The application rates and targets section for Vegetables/Ornamentals notes: 'Apply lightly to cover both upper and lower leaf surfaces.'🔗 Source
According to the label, what is the recommended procedure after applying the product into a carpenter ant void?
- Re-apply the dust every 30 days until activity ceases.
- Apply a liquid spray to the exterior of the nest.
- Inspect the colony after 6 months.
- Apply a second coating to the void after 3 days.
Show answer
The text states: 'When treating carpenter ant voids, the dust should be applied into the void, and the colony should be inspected after 6 months.'🔗 Source
To avoid aquatic toxicity, where should the product be kept away from during application?
- Drains and sewers.
- Water bodies.
- Areas where drainage to water bodies occurs.
- All of the above.
Show answer
The label states: 'avoid application near water or drains' and 'Do not apply directly into sewers, drains, or any area where drainage to water bodies occurs.'🔗 Source
← All practice exams