Start practice — 8 questions →
Sample questions
Which of the following is a listed site for Boundary Treatment?
- Industrial Non-Agricultural Applications
- Pad Mounted Electrical Sites
- Pavement crevices and fence lines
- Suburban settings
Show answer
The label lists pavement crevices and fence lines as sites for Boundary Treatment.🔗 Source
When treating Pad Mounted Electrical Sites to decrease ant mound building, what should be done if the site is partly or totally filled with soil?
- Flood the site with 1 to 2 gallons of water
- Remove excess soil and level before treating
- Apply granules only to the surface of the soil
- Wait until the Fall or early Spring to treat
Show answer
The label states that if electrical pads are filled with soil excavated by ants, you must remove excess soil and level before treating.🔗 Source
According to the restrictions, what must happen regarding food utensils like teaspoons or measuring cups after use with this insecticide?
- They must be washed with soap and water before reuse
- They must be boiled for 10 minutes
- They must not be used for food purposes
- They can be reused if they were only used for dry granules
Show answer
The label explicitly states that after use with insecticide, food utensils such as teaspoons and measuring cups must not be used for food purposes.🔗 Source
When treating soil and leaf litter to control tick larvae and nymphs, what is the recommended timing?
- Mid to late-spring
- Mid-spring to early fall
- Fall or early spring
- Early morning or late evening only
Show answer
The label states that to control larvae and nymphs in soil and leaf litter, treatments should be made in mid to late-spring.🔗 Source
What is the recommended application rate for ants at Pad Mounted Electrical Sites?
- 1.0 to 1.5 Tablespoons
- 2.3 to 4.6 lbs. per 1000 sq. ft.
- 1/2 cup per mound
- 0.06 to 0.09 lbs. per 1000 sq. ft.
Show answer
The label specifies a rate of 1.0 to 1.5 Tablespoons for ants at Pad Mounted Electrical Sites.🔗 Source
What is the required application rate for a Perimeter Treatment (5 to 10 feet wide around and adjacent to the structure)?
- 0.5 to 1.0 lbs. per 1000 sq. ft.
- 1.0 to 1.5 lbs. per 1000 sq. ft.
- 2.3 to 4.6 lbs. per 1000 sq. ft.
- 2.3 to 4.6 lbs. per acre
Show answer
The label specifies a rate of 2.3 to 4.6 lbs. per 1000 sq. ft. for Perimeter Treatments.🔗 Source
When treating a fire ant mound, how should the product be applied?
- Broadcast 2.3 to 4.6 lbs. per 1000 sq. ft. over the mound
- Apply 1/2 cup and flood the mound with 1 to 2 gallons of water
- Apply 1.0 to 1.5 tablespoons directly to the entrance
- Mix with 0.2 to 0.4 lbs. ai/Acre and spray
Show answer
For fire ant mounds, the label instructs to use 1/2 cup and flood the mound with 1 to 2 gallons of water.🔗 Source
To achieve the best results when treating fire ant mounds, what weather or timing conditions are recommended?
- In mid to late-spring only
- During the hottest part of the day
- In cool weather (65 to 80° F) or in early morning or late evening hours
- During the Fall or early Spring only
Show answer
The label recommends applying in cool weather (65 to 80° F) or in early morning or late evening hours for best results with fire ant mounds.🔗 Source
← All practice exams