Start practice — 8 questions →
Sample questions
To allow the chemical to enter the plant, how long must you avoid syringing or overspraying the foliage after application?
- 7 days
- 12 hours
- 18 to 24 hours
- Immediately after drying
Show answer
The label instructs not to syringe or overspray the foliage for 18 to 24 hours after applying.🔗 Source
Which PPE is required for early entry to treated areas involving contact with treated plants, soil, or water?
- Nitrile Rubber gloves ≥ 14 mils and overalls over long-sleeved shirt and long pants
- Face shield and chemical-resistant apron
- Respirator and waterproof boots
- Single-use latex gloves and short sleeves
Show answer
Required PPE includes overalls over a long-sleeved shirt and long pants, plus chemical-resistant gloves such as Nitrile Rubber ≥ 14 mils.🔗 Source
What condition must the plant foliage meet at the time of spray application?
- Foliage must be wet to ensure absorption
- Foliage must be well-watered but dripping
- Foliage must be dry
- Foliage must be coated in a wetting agent
Show answer
The label states that the plant foliage must be dry when sprays are applied.🔗 Source
Which of the following is a prohibited tank mix combination for B Nine 2026 03 22?
- Chlormequat chloride
- Copper-containing products
- Foliar fertilizers
- Insecticides
Show answer
The label explicitly states: 'Do not tank mix B-NINE with copper-containing products'.🔗 Source
To achieve a finished strength of 2,500 ppm for ornamental plants, how much product should be mixed per 1 gallon of solution?
- 1 level scoop or tablespoon
- 2 level scoops or tablespoons
- 4 level scoops or tablespoons
- 4/5 level scoop or tablespoon
Show answer
According to the mixing instructions, 2 units per 1 gallon of solution results in a 2,500 ppm finished strength.🔗 Source
When using B Nine 2026 03 22 in production areas that are NOT under cover, what is the restriction on plant types?
- Only bed-grown ornamentals may be used
- Use is restricted to containerized ornamentals
- Only research-grade crops are permitted
- No restrictions apply in outdoor areas
Show answer
The label states that in production areas not under cover, use is restricted to containerized ornamentals.🔗 Source
What is the re-entry interval (REI) for this product?
- 7 days
- 12 hours
- 18 hours
- 24 hours
Show answer
The label lists the REI as 12 hours.🔗 Source
What is the primary target effect of B Nine 2026 03 22 on plants?
- Internode elongation
- Fungal spore inhibition
- Insect population reduction
- Root system development
Show answer
The label specifies the target pest/effect as internode elongation.🔗 Source
← All practice exams