Start practice — 8 questions →
Sample questions
When using Aria 2026 03 22 in a tank mixture, when should products in water-soluble packaging be added?
- Before any other tank mix partner, including this product.
- After all other tank mix partners have been added.
- Simultaneously with the emulsifiable concentrates.
- Only after the agitator has been running for 10 minutes.
Show answer
The label states that all products in water-soluble packaging should be added to the tank before any other tank mix partner, including Aria.🔗 Source
When performing a jar test for physical compatibility, how long should the mixture be allowed to stand?
- At least 5 minutes.
- At least 15 minutes.
- At least 30 minutes.
- At least 1 hour.
Show answer
The mixing instructions state to let the jar test mixture stand for at least 5 minutes.🔗 Source
What should be conducted to ensure that phase separation does not occur during dilution and application?
- A diluents test.
- A pH stability test.
- A solubility concentration test.
- A temperature resistance test.
Show answer
The label notes that 'A diluents test should be conducted to ensure that phase separation would not occur during dilution and application.'🔗 Source
Under what condition may Aria 2026 03 22 be applied through an irrigation system supplied by a public water system?
- Only if water is discharged into a reservoir tank prior to pesticide introduction.
- Only if the public water system is a secondary backup source.
- Only if the application is performed during low-usage hours.
- It is strictly prohibited under all circumstances involving public water systems.
Show answer
The label allows application through irrigation systems supplied by a public water system only if the water is discharged into a reservoir tank before the pesticide is introduced.🔗 Source
When applying Aria 2026 03 22, how should the product be applied in relation to water application?
- It should be applied continuously for the duration of the water application.
- It should be applied only at the beginning of the water application.
- It should be applied in pulses every 30 minutes during water application.
- It should be applied only after the water application has concluded.
Show answer
The label states that Aria insecticide should be applied continuously for the duration of the water application.🔗 Source
According to the mixing instructions, what is the correct order for adding products to a tank mix?
- Water-soluble packaging, wettable powders, wettable granules, liquid flowables, liquids, and emulsifiable concentrates.
- Emulsifiable concentrates, liquids, liquid flowables, wettable granules, wettable powders, and water-soluble packaging.
- Liquids, emulsifiable concentrates, water-soluble packaging, wettable powders, and wettable granules.
- Wettable powders, water-soluble packaging, liquids, and emulsifiable concentrates.
Show answer
The label specifies adding products in the order of water-soluble packaging, wettable powders, wettable granules, liquid flowables, liquids, and emulsifiable concentrates.🔗 Source
What is a requirement regarding agitation when using Aria 2026 03 22 in a tank mix?
- Maintain agitation until all of the mixture has been applied.
- Agitation is only required during the initial mixing phase.
- Agitation must be stopped once the water is fully added.
- Agitation is never required if using suitable dilutents.
Show answer
The label instructs to 'Maintain agitation until all of the mixture has been applied.'🔗 Source
What must be done with a tank mix containing Aria 2026 03 22?
- Do not allow the tank mix to stand overnight.
- Do not allow the tank mix to stand for more than 2 hours.
- Always allow the tank mix to stand overnight to ensure dispersion.
- The tank mix must be used within 10 minutes of mixing.
Show answer
The label explicitly states: 'Do not allow tank mix to stand overnight.'🔗 Source
← All practice exams