Start practice — 8 questions →
Sample questions
Which of the following is NOT a target pest for AquashadePlus?
- Bluegreen algae
- Submersed plants
- Filamentous green algae
- Mosquito larvae
Show answer
The label lists submersed plants, algae blooms, filamentous green algae, and bluegreen algae as targets, but does not mention mosquito larvae.🔗 Source
What effect might active chlorine residuals, such as in a swimming pool, have on the product?
- The color and effectiveness may be lost
- The product will become more concentrated
- The product will turn a bright red color
- The product will increase the water depth
Show answer
The label notes that color and effectiveness may be lost in waters with active chlorine residuals.🔗 Source
In which type of environment is AquashadePlus most effective?
- Water depths of less than 2 feet
- Water depths exceeding 10 feet
- Deep reservoirs and oceans
- High-flow river currents
Show answer
The label states the product is most effective in water depths of less than 2 feet.🔗 Source
How should AquashadePlus be applied for the best results regarding timing?
- As a pre-emergent before the growing season
- During the peak of the summer bloom
- Only after the plants have died
- In the middle of the autumn harvest
Show answer
For best results, the label recommends applying it as a pre-emergent before the growing season.🔗 Source
What is a potential risk to shoreline non-target plants if the product is applied directly to them?
- They may suffer contact burn
- They may grow faster
- They may turn aqua-blue
- They may become resistant to algae
Show answer
The restrictions state that shoreline non-target plants may suffer contact burn if applied directly to them.🔗 Source
According to the label, where should AquashadePlus NEVER be applied?
- Water used for human consumption
- Golf course ponds
- Manmade lakes
- Water turfs
Show answer
The restrictions section explicitly states: 'Do not apply to water used for human consumption.'🔗 Source
What is the recommended application rate for AquashadePlus?
- 0.5-2.0 ppm total dye
- 5.0-20.0 ppm total dye
- 0.5-2.0 gallons per acre
- 10-50 ppm total dye
Show answer
The application rate listed in the label is 0.5-2.0 ppm total dye.🔗 Source
Which method can be used to achieve quicker dispersion of the product?
- Using aeration devices like fountains
- Mixing it with heavy silt
- Applying it only at midnight
- Injecting it into the lake bed
Show answer
The label states the product can be used with aeration devices like fountains for quicker dispersion.🔗 Source
← All practice exams