Start practice — 8 questions →
Sample questions
According to the label, where is Aquashade designed to be used?
- Indoor decorative fountains only
- Natural and manmade lakes and ponds
- Running streams and rivers
- Water intended for human consumption
Show answer
The product is used to manage plant growth in natural and manmade lakes and ponds.🔗 Source
When applying Aquashade, what is the restriction regarding intake or use areas?
- Do not apply within 10 feet of intake areas
- Do not apply within 50 feet of intake or use areas
- Do not apply within 100 feet of intake or use areas
- Do not apply within 5 feet of intake or use areas
Show answer
The label states to avoid concentrating the product within 50 feet of intake or use areas.🔗 Source
In which scenario should a technician use a higher application rate of 1.5-2.0ppm?
- When applying to deep water bodies
- When applying to water used for human consumption
- In shallow waters or in-season where growth is within 2 feet of surface
- When applying to large manmade reservoirs
Show answer
The application notes state to use higher rates (1.5-2.0ppm) in shallow waters or in-season where growth is within 2 feet of surface.🔗 Source
Under what weather or seasonal conditions can Aquashade be applied?
- Only during the peak growing season
- Only in warm climates during summer
- As a pre-emergent, during the growing season, or onto ice
- Only when water temperatures are above 60 degrees
Show answer
The label notes it can be applied as a pre-emergent, during the growing season, or onto ice in freezing climates.🔗 Source
What is the required mixing amount of Aquashade to achieve a finished strength of 0.5 ppm for 10,000 gallons of water?
- 0.6 oz.
- 1.0 oz.
- 1.5 oz.
- 2.0 oz.
Show answer
The mixing instructions specify 0.6 oz. per 10,000 gal for a finished strength of 0.5 ppm.🔗 Source
Which Personal Protective Equipment (PPE) is required when handling Aquashade?
- Chemical-resistant gloves made of any waterproof material
- N95 respirator and safety goggles
- Rubber apron and face shield
- Full-body Tyvek suit
Show answer
The PPE section requires long-sleeved shirts, long pants, shoes, socks, and chemical-resistant gloves made of any waterproof material.🔗 Source
Which of the following is a prohibited use for Aquashade?
- Applying to fish farming water bodies
- Applying to ornamental lakes
- Applying to water that will be used for human consumption
- Applying to recreational ponds
Show answer
The restrictions explicitly state: 'Do not apply to water that will be used for human consumption.'🔗 Source
Which of the following is a target pest for Aquashade?
- Floating algae mats
- Invasive fish species
- Mosquito larvae
- Waterborne bacteria
Show answer
The label states Aquashade suppresses submerged plants, floating algae mats, and emergent vegetation.🔗 Source
← All practice exams