Start practice — 8 questions →
Sample questions
When applying Altify IVM 2026 03 22 to Rights-of-Way, Utility and Industrial Areas and Fencerows, what is the maximum seasonal limit per acre?
- 2 fl. oz. per acre
- 10 fl. oz. (0.15 lbs. of active ingredient) per acre
- 15 fl. oz. per acre
- 20 fl. oz. per acre
Show answer
The restrictions state do not apply more than 10 fl. oz. (0.15 lbs. of active ingredient) per acre per season in these specific sites.🔗 Source
What is the required concentration and type of surfactant to be used for broadleaf weed control applications?
- A non-ionic surfactant (NIS) with a minimum concentration of 80% at 0.25% v/v
- A petroleum-based surfactant at 1.0% concentration
- A vegetable-based surfactant at 0.5% v/v
- A non-ionic surfactant (NIS) at 50% concentration
Show answer
The mixing instructions require a non-ionic surfactant (NIS) with a minimum concentration of 80% at 0.25% v/v.🔗 Source
According to the label, where is the product permitted to be applied for weeds growing under or on asphalt?
- Lawns and Gardens
- Ornamentals
- Paved Surfaces
- Crops
Show answer
The label lists 'Paved Surfaces' as the site for weeds growing under or on asphalt.🔗 Source
Which of the following target pests can be controlled with Altify IVM 2026 03 22 at a rate of 1/4 to 2 fl. oz. per acre?
- Velvetleaf (Up to 18 inches)
- Morningglories: Entireleaf, Ivyleaf, Pitted & Scarlet
- Silver Nightshade
- Common Cocklebur
Show answer
The label specifies a rate of 1/4 - 2 fl. oz. per acre for Velvetleaf (Up to 18 inches), whereas other listed pests require higher rates.🔗 Source
What is the application rate for controlling Common Ragweed and Silver Nightshade?
- 1/4 - 2 fl. oz. per acre
- 1 - 2 fl. oz. per acre
- 1 1/2 - 2 fl. oz. per acre
- 2.0 fl. oz. per acre
Show answer
The label specifies a rate of 1 1/2 - 2 fl. oz. per acre for Nightshade, Silver and Ragweed, Common.🔗 Source
To ensure best performance when using Altify IVM 2026 03 22, when should applications be made?
- During dormant periods
- To actively growing weeds
- Only during high wind conditions
- When weeds are in the seed stage
Show answer
The timing/weather section states that for best performance, make applications to actively growing weeds.🔗 Source
When performing broadleaf weed control, what is the recommended amount of petroleum or vegetable seed based oil concentrate per acre?
- 0.25 pints per acre
- 1.5 to 2.0 pints per acre
- 2.0 to 4.0 pints per acre
- 10 fl. oz. per acre
Show answer
The mixing instructions for broadleaf weed control specify petroleum or vegetable seed based oil concentrate at 1.5 to 2.0 pints per acre.🔗 Source
Which of the following is a prohibited use for sprayer cleaning solutions or rinsate?
- Applying to paved surfaces
- Applying to rights-of-way
- Applying to lawns, ornamentals, gardens or crops
- Applying to industrial areas
Show answer
The restrictions explicitly state: 'Do not apply sprayer cleaning solutions or rinsate to any lawns, ornamentals, gardens or crops.'🔗 Source
← All practice exams