Start practice — 8 questions →
Sample questions
According to the label, what is the correct dilution for the remedial control of Fungi (Rot) and Algae on wood members 4 inches thick or greater?
- 1:1 dilution
- 3:1 dilution
- 5:1 dilution
- 2:1 dilution
Show answer
For remedial control of Fungi (Rot) and Algae, use a 1:1 dilution on wood members 4" thick or greater.🔗 Source
When applying the product to Decking, Fences, and Plywood, what is the maximum thickness of the wood members allowed?
- 4 inches or less
- 2 inches or less
- 5 inches or less
- 1 inch or less
Show answer
For several target pests including termites and beetles, the label specifies to use on wood members 2" thick or less when applied to decking, fences, and plywood.🔗 Source
When applying in confined spaces, what respiratory protection is recommended if using a NIOSH-approved dust/mist filtering respirator?
- A prefilter approved for pesticides (MSHA/NIOSH approval prefix TC-23C)
- A standard surgical mask
- A simple cloth covering
- A full-face shield only
Show answer
For confined spaces, the label recommends a NIOSH-approved dust/mist filtering respirator with a prefilter approved for pesticides (MSHA/NIOSH approval prefix TC-23C).🔗 Source
For Old House Borers, Longhorn Beetles, and Ambrosia Beetles, what dilution should be used for prevention in wood that is less than 4 inches thick?
- 1:1 dilution
- 2:1 dilution
- 3:1 dilution
- 5:1 dilution
Show answer
For Old House Borers, Longhorn Beetles and Ambrosia Beetles, use the 5:1 dilution for prevention in wood less than 4" thick.🔗 Source
Which of the following is NOT a required piece of PPE for applicators, mixers, and other handlers?
- Chemical-resistant gloves
- Protective eyewear
- Long-sleeved shirt
- Nitrile apron
Show answer
The PPE section requires long-sleeved shirt, long pants, socks, shoes, chemical-resistant gloves, and protective eyewear, but does not mention a nitrile apron.🔗 Source
When treating logs, large beams, timber, or dimensional lumber greater than 4 inches thick for Subterranean and Formosan Termites, what dilution should be used for remedial treatments applied by spray, injection, brush, or roller?
- 1:1 dilution
- 2:1 dilution
- 5:1 dilution
- 3:1 dilution
Show answer
For remedial and preventative treatments of Subterranean and Formosan Termites on wood > 4", apply a 1:1 dilution by spray, injection, brush or roller.🔗 Source
Which target pest requires a 2:1 dilution ratio specifically for treating hardwood floors?
- Drywood Termites
- Carpenter Ants
- Anobiid and Lyctid Powderpost Beetles
- Old House Borers
Show answer
The label states to use a 2:1 dilution ratio for treating hardwood floors when targeting Anobiid and Lyctid Powderpost Beetles.🔗 Source
What is a specific restriction regarding the storage of the product solution?
- Do not store in direct sunlight
- Do not leave unused solution under pressure or in tank overnight
- Do not use in temperatures below freezing
- Do not mix with water in a metal container
Show answer
The restrictions section states: 'Do not leave unused solution under pressure or in tank overnight.'🔗 Source
← All practice exams