Start practice — 8 questions →
Sample questions
When preparing Admire Pro 1234 for use, what must the technician do to address the thixotropic nature of the formulation?
- Shake well to return the gel-like consistency to a non-viscous liquid
- Stir slowly to avoid creating excessive foam
- Add warm water to prevent the product from thickening
- Allow the product to sit for 24 hours before application
Show answer
Because the formulation is thixotropic and may revert to a gel, moderate shaking is required to return it to a relatively non-viscous liquid.🔗 Source
Regarding environmental hazards, where should Admire Pro 1234 NOT be applied?
- Near aquatic areas such as lakes, reservoirs, or rivers
- In areas with high humidity
- On slopes greater than 15 degrees
- In areas with heavy clay soil
Show answer
The label states the product is toxic to aquatic invertebrates and should not be applied near aquatic areas.🔗 Source
What is the Re-entry Interval (REI) for Admire Pro 1234?
- 12 hours
- 24 hours
- 48 hours
- 6 hours
Show answer
The label facts state the REI is 12 hours.🔗 Source
According to the label, which of the following is a specific restriction regarding the growing media used for plants treated with Admire Pro 1234?
- Do not apply to plants grown in non-soil media like rock wool or vermiculite
- Do not apply to plants grown in organic compost only
- Do not apply to plants grown in sand-based media
- Do not apply to plants grown in peat moss
Show answer
The label explicitly states not to apply the product to plants grown in non-soil media such as vermiculite, perlite, or rock wool.🔗 Source
To protect pollinators, when should application of Admire Pro 1234 be avoided?
- When bees are foraging or during flowering
- Only during the night when bees are inactive
- When temperatures are above 90F
- Only when wind speeds exceed 15 mph
Show answer
The label requires avoiding applications when bees are foraging or during flowering to protect pollinators.🔗 Source
Which of the following is a required clothing item for PPE when handling this product?
- Long-sleeved shirt and long pants
- Short-sleeved shirt and shorts
- Tyvek suit
- Rubber boots
Show answer
The label requires the use of long-sleeved shirts and long pants as part of the PPE requirements.🔗 Source
Which of the following is a required piece of Personal Protective Equipment (PPE) for handling Admire Pro 1234?
- Chemical-resistant gloves (such as nitrile or butyl rubber)
- A full-face respirator
- Waterproof chemical apron
- Safety goggles
Show answer
The label specifies the use of chemical-resistant gloves made of materials like nitrile, butyl rubber, or neoprene.🔗 Source
For food crops or ornamentals, what temperature restriction must be observed during application?
- Avoid application if temperatures are below 55F
- Avoid application if temperatures are above 85F
- Avoid application if temperatures are below 40F
- Avoid application if temperatures are above 100F
Show answer
The label specifies that for food crops/ornamentals, application should be avoided if temperatures are below 55F.🔗 Source
← All practice exams