Start practice — 8 questions →
Sample questions
When treating a severe infestation of Chinch Bugs on a Golf Course, what is the recommended application rate?
- 0.9 to 1.5 oz.
- 0.75 oz.
- 0.8 to 1.4 oz.
- 0.4 to 0.8 oz.
Show answer
The label specifies a rate of 0.9 to 1.5 oz. for Chinch Bugs on Golf Courses.🔗 Source
For Sod Farm users, how much time must elapse between the final application and harvesting sod?
- 24 hours
- 7 days
- 3 days
- 15 days
Show answer
The restrictions state: 'For Sod Farms, allow at least 3 days to elapse between final application and harvesting sod.'🔗 Source
When controlling Black Turfgrass Ataenius (except CA) on a Golf Course, what is the instruction regarding irrigation?
- Do not irrigate after application.
- Irrigate heavily to ensure penetration.
- Irrigate lightly after application (not more than 1/2 inch).
- Wait 3 days before irrigating.
Show answer
For Black Turfgrass Ataenius on Golf Courses, the label says: 'Irrigate lightly after application (not more than 1/2 inch).'🔗 Source
According to the label, which of the following sites is NOT listed as a location for Leafhopper control?
- Golf Courses
- Sod Farms
- Turfgrass
- Residential Lawns
Show answer
The label only lists Turfgrass (Golf Courses and Sod Farms only) for Leafhopper control.🔗 Source
What is the minimum amount of water required per 1,000 sq. ft. when applying the product to control Cutworms on a Sod Farm?
- 4 gallons
- 5 gallons
- 15 gallons
- 1 to 15 gallons
Show answer
The label requires a minimum of 15 gallons of water per 1,000 sq. ft. for Cutworm control on Sod Farms.🔗 Source
If applying Acephate 97UP to control Greenbugs or Grasshoppers, what is a specific timing/maintenance restriction?
- Do not irrigate for 24 hours.
- Do not mow turfgrass for at least 24 hours after application.
- Apply only during the early morning.
- Do not apply more than once per season.
Show answer
The notes for Greenbug and Grasshopper applications state: 'Do not mow turfgrass for at least 24 hours after application.'🔗 Source
What is the maximum allowable product application limit per acre for Sod Farms?
- 3.09 lbs. product/A
- 4.12 lbs. product/A
- 1.5 oz. per 1,000 sq. ft.
- 15 gallons per 1,000 sq. ft.
Show answer
The restrictions state: 'Do not apply more than 3.09 lbs. product/A for Sod Farms...'🔗 Source
Which application method is explicitly prohibited by the label?
- Airblast application in California for certain turf types
- Ground spray application
- Evening application
- Application after irrigation
Show answer
The restrictions state: 'Do not apply aerially' and specifically prohibit 'Airblast application' for certain turf/golf course uses in California.🔗 Source
← All practice exams